ABB 70BT01C HESG447024R1 Bus Transmitter Module – Procontrol P13/P14 DCS Protection-to-Control Bridge

Product Categories

ABB 70BT01C HESG447024R1 Bus Transmitter Module – Procontrol P13/P14 DCS Protection-to-Control Bridge
ABB 70BT01C HESG447024R1 Bus Transmitter Module – Procontrol P13/P14 DCS Protection-to-Control Bridge - Image 2

ABB 70BT01C HESG447024R1 Bus Transmitter Module – Procontrol P13/P14 DCS Protection-to-Control Bridge

Product Overview

The 70BT01C HESG447024R1​ is a high-performance bus transmitter and isolation amplifier module engineered by ABB specifically for the PROCONTROL P distributed control system platform, with primary deployment in PROCONTROL P13 and P14 architectures. As a critical communication interface, the 70BT01C HESG447024R1​ serves as the indispensable bridge between the PROCONTROL-PS protection system and the main PROCONTROL P control bus, translating protection and process signals into the proprietary P-Bus protocol while providing robust galvanic isolation between disparate system segments. In large-scale process automation environments where a single missed trip signal can escalate into catastrophic equipment damage, the 70BT01C HESG447024R1​ stands as the guardian of signal integrity.

Functioning as both a protocol converter and an isolation barrier, the 70BT01C HESG447024R1​ accepts up to 32 binary or analog input signals from the protection system layer and transmits them as 32 synchronized P-Bus signals to the main controller at data rates up to 500 kbps. The module’s 1500 V DC galvanic isolation eliminates ground-loop interference and ensures that electrical transients on the protection side cannot propagate into the control architecture. Configuration is accomplished through ABB’s Process Data Display System (PDDS), with marshalling and limit-value lists loaded into onboard RAM and permanently stored in non-volatile EEPROM—guaranteeing that configuration survives power cycles and module replacements.

The 70BT01C HESG447024R1​ is designed for seamless insertion into the PROCONTROL P13 system rack, drawing 24 V DC power directly from the backplane with typical consumption of 3–5 W. Its compact form factor (approximately 16 × 202 × 147 mm, 0.25 kg) and IP20 protection rating make it ideally suited for control cabinet installation in power plants, petrochemical facilities, and metallurgical process areas. With an operating temperature range of -20 °C to +60 °C and relative humidity tolerance up to 95% non-condensing, the 70BT01C HESG447024R1​ delivers dependable performance in the harshest

ABB 70BT01C HESG447024R1 Bus Transmitter Module – Procontrol P13/P14 DCS Protection-to-Control Bridge

 

Technical Specifications

Parameter Value
Product Model 70BT01C​ (Order Code: HESG447024R1)
Additional Part Numbers HEB67077-31B, HE664174-318/21, HE664174-318/23
Manufacturer ABB (Origin: Sweden/Switzerland)
Product Type Bus Transmitter Module / Isolation Amplifier
Compatible System ABB PROCONTROL P13 / P14 DCS
Primary Function Interface between PROCONTROL-PS protection system and main P-Bus
Communication Protocol ABB PROCONTROL proprietary bus / P-Bus
Data Rate Up to 500 kbps
Input Signals Up to 32 binary or analog inputs
Output Signals 32 PROCONTROL P-Bus signals
Galvanic Isolation 1500 V DC (channel-to-system)
Power Supply 24 V DC (backplane-powered)
Supply Voltage Range 10.5–45 V DC (no load); IS version ≤ 30 V DC
Ripple Tolerance Per HART FSK “Physical Layer” spec Rev. 8.1
Power Consumption < 10 W (typical 3–5 W)
Configuration Via PDDS; non-volatile EEPROM storage
Redundancy Compatible with redundant communication architectures
Operating Temperature -20 °C to +60 °C
Storage Temperature -40 °C to +85 °C
Relative Humidity 0–95% RH, non-condensing
Protection Rating IP20 (control cabinet installation)
Mounting Method PROCONTROL P13 system rack insertion
Diagnostics Communication status monitoring, fault detection, error reporting
Dimensions (H×W×D) Approx. 16 × 202 × 147 mm
Weight Approx. 0.25 kg
Certifications CE, UL, CSA; compliant with IEC 61131
Environmental Vibration per IEC 60068-2-6; Shock per IEC 60068-2-27
Protection Features Reverse polarity protection; IS version voltage-limited for hazardous areas
Warranty 12 months

 

Main Features and Advantages

The 70BT01C HESG447024R1​ derives its exceptional reputation in the power and process industries from a combination of signal-integrity engineering, robust isolation, and seamless system integration. At its core, the 70BT01C HESG447024R1​ solves the most critical challenge in protection-system architecture: how to safely and reliably transport trip commands, status signals, and measurement data from the PROCONTROL-PS protection layer into the main PROCONTROL P control bus without compromising electrical independence or signal fidelity.

Galvanic isolation for absolute safety:

The 1500 V DC galvanic isolation built into the 70BT01C HESG447024R1​ creates a hard electrical barrier between the protection system and the control bus. This isolation mitigates ground-loop interference, prevents fault currents from propagating across system boundaries, and protects sensitive control electronics from transients originating on the protection side. In power generation applications—particularly turbine control and generator protection—this isolation is not a luxury but a fundamental safety requirement.

High-density signal integration:

With support for up to 32 binary or analog input channels converted into 32 synchronized P-Bus output signals, the 70BT01C HESG447024R1​ consolidates an entire protection signal marshalling zone into a single module. This high channel density dramatically reduces rack space, wiring complexity, and total installed cost while maintaining deterministic, real-time signal availability across the remote bus. The 500 kbps data rate ensures that even the most time-critical trip commands reach the controller within milliseconds.

Related products

Scroll to Top