DS200DCFBG2BNC MRP420024
It is equipped with advanced control and signal processing capabilities. The module can send and receive input and output signals through a combination of eighteen plug connectors and nine stab connectors. These connectors are labeled clearly, such as the stab connectors in the upper – left corner labeled V1 through V3, P1A, P2A, VM1A, VM1B, VB2A, and VM2BA. This allows for seamless communication with other components in the system, enabling precise control over the operation of the overall industrial process. In an industrial automation scenario, it can accurately transmit control signals to actuators based on the received sensor data, achieving efficient process control.
Component Configuration
The DS200DCFBG2BNC MRP420024 module is populated with a variety of components. It includes seven dip switches, which are used for functions like selecting the AC line voltage, setting the voltage applied to the DC bridge voltage feedback VCO circuit, and adjusting the voltage for the DC motor voltage feedback circuit. There are also five TP test points, enabling users to check voltage signals, board common, and ACCT signal status. Twelve jumpers are present for circuit configuration purposes. In addition, three fuses are incorporated for power supply protection, and indicators (two LED lights and one neon indicator) will light up if any of these fuses are blown. The board also contains seven transformers, oscillating chips, a relay, over fifty resistor network arrays, heat sinks, and various integrated circuits, capacitors, and resistors. It uses CCR (carbon composite) resistors and metal – film – material resistors, which contribute to its stable performance.
3. Product Parameters
- Power Supply Voltage: Designed to operate with the appropriate voltage levels required by the Mark V system, which may vary depending on the overall system configuration, but typically within the standard industrial voltage ranges.
- Connector Types:
- Plug Connectors: 18 in total, ranging from male 2 – pin connectors to multi – pin connectors, facilitating diverse signal connections.
- Stab Connectors: 9, with specific labels (V1 – V3, P1A, P2A, VM1A, VM1B, VB2A, VM2BA) for targeted electrical connections.
- Dip Switch Functions:
- AC Line Voltage Selection: Capable of adapting to different AC line voltage standards.
- DC Bridge Voltage Feedback VCO Circuit Voltage Setting: Allows for precise adjustment of the voltage in this specific circuit.
- DC Motor Voltage Feedback Circuit Voltage Adjustment: Enables fine – tuning of the voltage for the DC motor voltage feedback.
- Test Point Functions:
- Voltage Signal Check: The five TP test points can be used to measure and monitor voltage signals within the module.
- Board Common and ACCT Signal Status Monitoring: They also help in determining the status of the board common and ACCT signals.
- Fuse Ratings and Protection: The three fuses are rated to protect the power supply within the module from over – current and other electrical faults. When a fuse is blown, the associated LED and neon indicators will activate.
- Component – Level Parameters:
- Transformers: Seven transformers are used to step – up or step – down voltages as required by different parts of the module.
- Resistor Network Arrays: Over fifty resistor network arrays contribute to the module’s electrical characteristics and signal processing.
4. Product Specifications
- Model Number: DS200DCFBG2BNC MRP420024
- Manufacturer: General Electric
- Series: Mark V
- Module Type: Power Supply and Control Module
- Dimensions: Specific dimensions are not widely available in the common resources, but as a printed circuit board – type module in an industrial control system, it is designed to fit standard industrial enclosures and mounting configurations.
- Weight: Exact weight information is not commonly disclosed, but it is lightweight enough to be easily installed and integrated into industrial control cabinets.
- Mounting: It is likely designed for standard mounting within the Mark V system’s chassis or control cabinets, following industrial – standard mounting practices.
- Certifications: Although not explicitly stated in the available information, it is expected to meet relevant industrial certifications for safety and performance, such as CE, UL, etc., considering General Electric’s reputation and the requirements of the industrial market.
- Warranty: Usually, it comes with a 1 – year warranty, but it is advisable to check with the manufacturer or the supplier for the exact warranty terms.