ABB S-113N 3BHB018008R0001
ABB S-113N 3BHB018008R0001 Module
| Category | Specific Content |
|---|---|
| Product Name | Industrial Control Logic & Interface Module |
| Product Description | This module is a core control and interface component in ABB’s industrial automation product portfolio, specifically tailored for medium-voltage power conversion systems, turbine control units, and heavy-duty industrial equipment control scenarios (including metallurgical smelting devices and power plant auxiliary systems). It integrates high-speed logic processing circuits and multi-type signal interfaces, acting as a bridge between upper-level control platforms and field-side sensors/actuators to realize real-time logic operation, signal conversion, and instruction transmission. The module adopts an industrial-grade reinforced design with outstanding anti-electromagnetic interference (EMI) and vibration resistance, enabling stable operation in harsh industrial environments with voltage fluctuations and mechanical shocks. It seamlessly integrates with ABB’s Symphony Plus DCS and ACS series inverters, supports hot-swappable maintenance to minimize system downtime, and is equipped with built-in fault self-diagnosis and event logging functions for efficient on-site troubleshooting, ensuring the reliability and safety of critical industrial control systems. |
| Product Parameters | 1. Logic Processing Parameters: Embedded 32-bit industrial control core with a single instruction execution cycle of ≤ 80ns; supports 32-bit integer and floating-point arithmetic operations, with a maximum logic processing throughput of 60 Mbps for complex control algorithms.
2. I/O & Interface Parameters: Configured with 16-channel digital input (24V DC), 12-channel relay output (250V AC/30V DC, 5A), 4-channel analog input (4-20mA/0-10V), and 2-channel analog output (4-20mA); analog signal conversion precision is ±0.2% FS, with a sampling rate of up to 150Hz. 3. Power Supply Parameters: Control circuit operating voltage is 24V DC (redundant power supply supported), with a voltage fluctuation tolerance of ±15%; maximum operating current is 1.2A, and typical power consumption is ≤ 18W.
4. Environmental Parameters: Operating temperature range is -25℃ to 70℃; storage temperature range is -40℃ to 85℃; adaptable to 5%–95% RH (non-condensing); complies with IEC 61000-4-2/3/4 for EMC protection against electrostatic discharge and radio frequency interference. |
| Specifications | 1. Physical Specifications: Overall dimensions are 205mm × 125mm × 45mm, with a net weight of approximately 0.95kg; adopts a standard 35mm DIN rail or panel mounting structure, conforming to industrial cabinet installation norms.
2. Protection Specifications: Module body protection grade is IP20, suitable for enclosed cabinet installation; signal channels have 2kV AC electrical isolation between each other, and the power interface is equipped with surge protection compliant with IEC 61000-4-5 (4kV contact/8kV air). 3. Compatibility Specifications: Fully compatible with ABB 3BHB series control modules, Symphony Plus distributed control systems, and ACS medium-voltage inverters; supports Modbus TCP/IP and PROFINET communication protocols for real-time data interaction with upper-level systems, and enables online parameter configuration and firmware upgrade without interrupting system operation. 4. Reliability Specifications: Mean Time Between Failures (MTBF) ≥ 85,000 hours; equipped with overvoltage, overcurrent, and overheating protection functions, with fault response time ≤ 15μs; built-in alarm output for timely fault notification and traceable event logs for post-failure analysis. |
