DS200DCFBG1BLC
GE DS200DCFBG1BLC DC Feedback Board Module
II. Product Description
The GE DS200DCFBG1BLC is a high-reliability DC feedback board module designed for industrial motor control systems, typically used in GE’s Mark V or Mark VIe turbine control platforms. It serves as a critical component for monitoring and regulating direct current (DC) feedback signals from motors, generators, or other electrical devices, ensuring precise control and stability in industrial processes.
Key Functions:
- DC Signal Conditioning: Processes analog feedback signals (e.g., voltage, current) from DC motors to maintain accurate speed and torque control.
- Redundancy Support: May integrate with redundant control systems to enhance operational reliability in critical applications like power generation or manufacturing.
- Signal Isolation: Incorporates electrical isolation to prevent interference and protect downstream control components.
- Diagnostic Capabilities: Monitors internal health and feedback signal integrity, providing fault indicators for quick troubleshooting.
III. Product Parameters
(I) Electrical Parameters
- Power Supply:
- Voltage: 24V DC (±10%)
- Power Consumption: ≤ [X] W (e.g., 10 W typical for feedback boards)
- Input Signal Range:
- DC Voltage: 0–10V, 0–5V
- DC Current: 4–20mA, 0–20mA
- Isolation Voltage: [Y] Vrms (input-to-output/ground isolation)
- Output Signal: Standardized analog signals for PLC/control system interface
(II) I/O Specifications
- Input Channels: [M] isolated analog inputs (e.g., 4 channels)
- Output Channels: [N] analog outputs (e.g., 2 channels for speed/torque feedback)
- Resolution: [P] bits (e.g., 12-bit ADC for precise signal conversion)
(III) Communication & Control
- Protocol Support: Proprietary GE protocols (e.g., SERCANS) or standard interfaces (Modbus RTU via adapter)
- Update Rate: [Q] ms (e.g., 10 ms for real-time feedback)
(IV) Environmental Parameters
- Operating Temperature: -40°C to 70°C
- Storage Temperature: -40°C to 85°C
- Humidity: 5%–95% (non-condensing)
- Vibration Resistance: IEC 60068-2-6 (2G, 5–500Hz)
- Shock Resistance: IEC 60068-2-27 (15G, 11ms)
IV. Product Specifications
(I) Physical Attributes
- Dimensions: [A] mm × [B] mm × [C] mm (e.g., 200 × 150 × 50 mm)
- Weight: Approximately [D] kg (e.g., 1.2 kg)
- Mounting: DIN-rail or panel-mounted (compatible with GE control racks)
(II) Certification & Compliance
- Standards:
- CE, UL 508 (Industrial Control Equipment)
- RoHS compliant (restricted hazardous substances)
- System Compatibility: GE Mark V/VIe, Proficy™ Control Systems